Din 28091 1 pdfs

Searching:
pdf
GORE GR sheet gasketing

GORE ® GR SHEET GASKETING GORE® GR sheet gasketing has been developed for a secure flange connection offering an enduring seal for all pipeline and appa-

http://www.gore.com/MungoBlobs/453/314/GORE_GR_Sheet_Gasketing_Datasheet_en.pdf

Date added: August 18, 2016 - Views: 1

pdf
European Association e.V. Tightness in gasketed fl...

- DIN 28091-1 defi nes general requirements regarding dimensions and markings. Technical delivery conditions are defi ned for compressed fi bre

http://europeansealing.com/uploads/resources/ESA_BAT_1112_Gasket_tightness_2_early_standards.pdf

Date added: August 18, 2016 - Views: 1

pdf
Gasket factors Dichtungsfaktoren - Klinger

Gasket factors σ BO (7.2.2) DIN 28090/DIN 28091 DIN 2505 ASTM σ BO (7.2.2) DIN 28090/DIN 28091 DIN 2505 ASTM

http://www.klinger.co.za/technical-data/gaskets/docs/Gasket-Factors-DIN.pdf

Date added: August 18, 2016 - Views: 1

pdf
AFM 34 - REINZ

Nominal thicknesses and tolerances acc. to DIN 28091-1 (mm) Dimensional limits within a shipment 0.30 ±0.10 ... and 0.2 mm for thickness >1.00 mm AFM 34 4 - 4

http://datenblatt.reinz.de/_pdf/out/web1/AFM_34_en.pdf

Date added: August 18, 2016 - Views: 1

pdf
KLINGER Quantum WIP

KLINGER Quantum Quantum was ... Hot compression DIN 28091-2 <18% Hot recovery DIN 28091-2 2% 1. Usually satisfactory without reference. 2. Usually satisfactory, but ...

http://www.klinger.co.uk/assets/files/klinger_quantum_datasheet.pdf

Date added: August 18, 2016 - Views: 1

pdf
DIN 28091-2:2014-11 (E) - Beuth Verlag

- 1 - DIN 28091-2:2014-11 (E) Technical delivery conditions for gasket sheets - Part 2: Requirements and testing for fibre-based gasket materials (FA)

https://www.beuth.de/de/fachgebiete/maschinenbau/fachdaten-einzelsicht/wdc-beuth:din21:216672640/toc-2320272/download

Date added: August 18, 2016 - Views: 1

pdf
novatec engineered graphite with Kevlar

Tolerances in size and thickness: acc. to DIN 28091-1 * = Mode (typical value) The technical data stated has been determined with standard material under laboratroy

http://www.frenzelitsealing.com/file/2846_NT%20925F%20_%200,8mm_englisch.pdf

Date added: August 18, 2016 - Views: 1

pdf
AFM 34 - 123gaskets

DIN 28091-2: Cold creep ε KSW % 5 ... Page 1 of 3 mhtml:file://V:\AFM 34 betriebsdrucktabelle_php EN.mht 21 -10 -2013. 3) With strong acids or alkaline solutions ...

http://www.123gaskets.com/prod/prodpdf/afm_34_10_1.pdf

Date added: August 18, 2016 - Views: 1

pdf
KLINGERtop-sil-ML1 - Klinger - Industrial gaskets

KLINGERtop-sil-ML1 Optimised, unique multi-layer combination of a ... DIN 28090-1 VDI 2440 DIN 28091-2 DIN 28091-2 DIN 28091-2 DIN 28091-2 DIN 20091-2 Oil IRM 903 5h ...

http://www.klinger.co.uk/assets/files/klingertop-sil-ml1.pdf

Date added: August 18, 2016 - Views: 1

pdf
LS 048-1XX EN - ebusiness.linde-le.com

Gaskets according to DIN / EN LINDE STANDARD LS 048-1XX Page 1 of 6 Remarks on the current issue: Revision: ... DIN 28091 Technical delivery conditions for gasket sheets

http://ebusiness.linde-le.com/ls.ext/Data/LS000/048-/1XX/E0909.pdf

Date added: August 18, 2016 - Views: 1

pdf
Sealing material C-4400 - KLINGER Australia

DIN 28090-1 VDI 2440 DIN 28091-2 DIN 28091-2 DIN 28091-2 DIN 28091-2 DIN 28091-2 oil JRM 903: 5h/150°C fuel B: 5h/23°C R OA

http://www.klinger.com.au/documents/C-4400.pdf

Date added: August 18, 2016 - Views: 1

pdf
Process Rubber and Plastics Pty Ltd 13 Islington...

DIN 28091-GR-11-1-1 SGI CARBON GRO DIN Sigraflex Hochdruck@ is a multi-layer sheet material comprising 0.5mm thick layers of high quality graphite foil and 0.5mm ...

http://www.processrubber.com.au/pdf/Hochdruck.pdf

Date added: August 18, 2016 - Views: 1

pdf
AFM 38 - REINZ

Nominal thicknesses and tolerances acc. to DIN 28091-1 (mm) ... 0.1 mm for sheet thickness ≤1.00 mm, and 0.2 mm for thickness >1.00 mm AFM 38 3 - 3

http://datenblatt.reinz.de/_pdf/out/web1/AFM_38_en.pdf

Date added: August 18, 2016 - Views: 1

pdf
Flat gaskets with stainless steel inner bead,...

Flat gaskets with stainless steel inner bead, blow- out resistant (ME) for welding neck flanges with raised face, ... Tolerances Thickness: DIN 28091-1, Issue 9/95

http://datenblatt.reinz.de/_pdf/out/web1/Flat_gaskets_with_stainless_steel_inner_bead__blow-out_resistant__ME__en.pdf

Date added: August 19, 2016 - Views: 1

pdf
Product range: BAGL 3000 - Industrial Gaskets

BAGL 3000 is in compliance with DIN 28091-2 and BS 7531 Grade X requirements. APPLICATION The exclusive properties of BAGL 3000, particularly its

http://www.industrialgaskets.com.au/uploaded/Tesnit%20BAGL-3000.pdf

Date added: August 18, 2016 - Views: 1

pdf
Gasket sheet Paro-Gambit typ 246 - Трега ООД

Gasket sheet Paro-Gambit typ 246 ... Classification per DIN 28091-2 FA-CM1-0 ... Density 1,9 Maximal operating conditions: Peak temperature Continous temperature

http://www.tregaltd.com/files/Gasket%20sheet%20ParoGambit.pdf

Date added: August 18, 2016 - Views: 1

pdf
novapress UNIVERSAL The all-round high-pressure...

novapress® UNIVERSAL the following special properties: ... Sheet size and thickness tolerance according DIN 28 091-1 Physical properties Standard Unity Value*

http://www.123gaskets.com/prod/prodpdf/novapress_universal_16_1.pdf

Date added: August 18, 2016 - Views: 1

pdf
AFM 32/2 - VICTOR REINZ

Nominal thicknesses and tolerances acc. to DIN 28091-1 (mm) Dimensional limits within a shipment: 0.30 ±0.10 ... and 0.2 mm for thickness >1.00 mm AFM 32 2 3 - 3

http://datenblatt.reinz.de/_pdf/out/web1/AFM_32_2_en.pdf

Date added: August 18, 2016 - Views: 1

pdf
Technical Data Sheet JMP ACID - Natal Gaskets

Technical Data Sheet JMP ACID Basis: Aramide Fibres, CSM DIN 28091-2DIN 28091-2 General Properties and Applications: Dimensions of standard sheets:

http://www.natalgaskets.com/documents/specs/igm/jmpacid.pdf

Date added: August 18, 2016 - Views: 1

pdf
AFM 34 CO ME: Flat gaskets with stainless steel...

AFM 34 CO ME: Flat gaskets with stainless steel inner bead, blow- out resistant ... Thickness: DIN 28091-1 Diameters d 1 and d 2: DIN ISO 2768-1 tolerance class v

http://datenblatt.reinz.de/_pdf/out/web1/AFM_34_CO_ME_en.pdf

Date added: August 25, 2016 - Views: 1

pdf
Technical specification - Sundquist Components

Technical specification KLINGERsil C-4400 Description Suitable for oil, water, hydrocarbon, ... Hot compression % < 15 DIN 28091-2 Hot recovery % 1 DIN 28091-2

http://www.sundquistcomp.se/wp-content/uploads/2011/10/SQ-Teknisk-spec-KLINGERsil-C-4400.pdf

Date added: August 25, 2016 - Views: 1

pdf
Flat gaskets made from graphite, fibre, PTFE,...

Flat gaskets made from graphite, fibre, PTFE, elastomer 24 03 ... accordance with DIN 28091-2. ... DVGW-DIN 3535-1

http://www.kempchen.de/e/prospekte/pdf/03-016-019%20Flat%20gaskets%20made%20from%20graphite_fibre_PTFE_elastomer.pdf

Date added: August 18, 2016 - Views: 1

pdf
Product range: BACF 4000 - Dynoteq

EN 1514-1, Type IBC, PN 40/DIN 28091-2, 3.8/thickness 2.0 mm BACF 4000 0 50 100 150 0 50 100 150 200 250 300 350 400 PRESSURE (bar) TEMPERATURE (C°) P-T DIAGRAM

http://www.dynoteq.com/en/files/en/donit-tesnit/bacf-4000.pdf

Date added: August 25, 2016 - Views: 1

pdf
AFM 37 - REINZ

Nominal thicknesses and tolerances acc. to DIN 28091-1 (mm) ... 0.1 mm for sheet thickness ≤1.00 mm, and 0.2 mm for thickness >1.00 mm AFM 37 3 - 3

http://datenblatt.reinz.de/_pdf/out/web1/AFM_37_en.pdf

Date added: August 25, 2016 - Views: 1

pdf
Technisches Datenblatt / Technical datasheet:...

DIN 28091-2 mg/ (s · m) < 0.1 DIN 28091-2 % > 50 Norm / Standard Einheit / Unit Wert / Value - °C 400 - °C 250 - °C 200 AFM 34 CO ME °C 220 - bar 150 Prod. Code ...

https://shop.maagtechnic.ch/maag/Datasheets/Dichtung-AFM-34_ger_eng.pdf

Date added: August 18, 2016 - Views: 1

pdf
DE Test Report

GORE™ GR 05 - 0,5 mm; GORE™ GR 10 - 1,0 mm; GORE™ GR 15 - 1,5 mm; GORE™ GR 20 - 2,0 mm; GORE™ GR 30 ... Toleranzen nach / Tolerances according to DIN 28091-3

http://www.kempchen.de/d/zertifikat/Produkte/03-Weichstoffdichtungen/Flachdichtungen/PTFE-Flachdichtungen/FDA-Gore_Konformit%E4tsbescheinigung-31.10.07.pdf

Date added: August 18, 2016 - Views: 1

pdf
novapress MULTI II - Paramount Supply

novapress ® MULTI II ASTM Fuel ... acc. DIN 28091-1 Property NBR DVGW / BAM (max. 60°C / 130 bar) / GL both sides A310 both sides blue • Application in steam ...

http://www.paramountsupply.com/products_docs/frenzelit/TDB%20novapress%20MULTI%20II_e.pdf

Date added: August 18, 2016 - Views: 1

pdf
Technical Data Sheet - Start

• Sheet sizes in mm: 1500x1500 / 1000x2000 • Special sheet sizes upon request ... acc. DIN 28091-1 Property Identification Density Tensile strength longitudinal

http://www.frenzelitsealing.com/file/621_TDB%20novatec%20825%20F_e_24mm.pdf

Date added: August 18, 2016 - Views: 1

pdf
Во всю страницу - sealur.ru

< 0.1 (DIN 28091-4) 550/450 100 450 -C) Pyn0HS AO 500 MM • 2.0 > 40 950/950 pyn0HH AO 500 MM . Title: Во всю страницу Author: admin Created Date:

http://www.sealur.ru/pdf/cat_vr.pdf

Date added: August 19, 2016 - Views: 1

pdf
Technical Data Sheet - Paramount Supply

acc. DIN 28091-1 Standard Unity Value * Physical DIN 28 091-2 FA - A 1 - O properties (Gasket thickn. DIN 28 090-2 [g/cm³] 1,70 2.00mm) DIN 52 910 [N/mm²] 18

http://www.paramountsupply.com/products_docs/frenzelit/TDB%20Premium%20II_e_20mm.pdf

Date added: August 18, 2016 - Views: 1

pdf
Product range: BAU 2000 - Dynoteq

‘ Correspond to DIN 28091-2 BAU 2000 030407 In order to spread the most comprehensive knowlege of our products, our highly skilled group of experts organized in

http://www.dynoteq.com/en/files/en/donit-tesnit/bau-2000.pdf

Date added: August 18, 2016 - Views: 1

pdf
Technisches Datenblatt / Technical datasheet:...

DIN 28091-2 % 15 - 25 DIN 28091-2 % ≈ 0.8 DIN 28091-2 mm ≈ 0.015 DIN 28091-2 % > 50 DIN 28091-2 mg/ (s m) < 0.1 DIN 28091-2 % 8 - 13 DIN 28091-2 % 60 - 70

https://shop.maagtechnic.ch/maag/Datasheets/Dichtungsplatte-REINZ-AFM-38_ger_eng.pdf

Date added: August 18, 2016 - Views: 1

pdf
AFM 30 - Tóth és Társai Tömítésgyártó és...

Properties AFM 30 is conformable and exhibits excellent ... Nominal thicknesses and tolerances acc. to DIN 28091-1 (mm) Dimensional limits within a shipment: 0.30 ...

http://tothtomites.hu/pdf/AFM_30_en.pdf

Date added: August 18, 2016 - Views: 1

pdf
Technical Data Sheet JMP 6000 WIRE - Natal Gaskets

Technical Data Sheet JMP 6000 WIRE Basis: Biosoluble mineral fibres / NBR, Wire Reinforced DIN 28091-2 -> F-A-M1-St General Properties and Applications:

http://www.natalgaskets.com/documents/specs/igm/jmp6000wire.pdf

Date added: August 18, 2016 - Views: 1

pdf
BA-U - Industrial Gaskets

BA-U, 2 mm TEMPERATURE [°C] PRESSURE [bar] 100 80 60 40 20 0 EN 1514-1, Type IBC, PN 40/DIN 28091-2, 3.8. In order to spread the most comprehensive knowledge of

http://www.industrialgaskets.com.au/uploaded/Tesnit%20BA-U.pdf

Date added: August 25, 2016 - Views: 1

pdf
novatec PREMIUM XP - Frenzelit

acc. DIN 28091-1 Standard Unity Value * Physical DIN 28 091-2 FA - A 1 - O properties (Gasket thickn. DIN 28 090-2 [g/cm³] 1.74 ... novatec ® PREMIUM XP

http://www.frenzelit.com/file/5663_TDB_novatec_PREMIUM_XP_2_0_mm_englisch.pdf

Date added: August 25, 2016 - Views: 1

pdf
Technical Data Sheet JMP 6000 - Natal Gaskets

Technical Data Sheet JMP 6000 Basis: Biosoluble mineral fibres / NBR DIN 28091-2 General Properties and Applications: Dimensions of standard sheets:

http://natalgaskets.com/documents/specs/igm/jmp6000.pdf

Date added: August 18, 2016 - Views: 1

pdf
Product range: BAM 6000 - Dynoteq

sealability BAM 6000 is particularly recommended for all ... EN 1514-1, Type IBC, PN 40/DIN 28091-2, 3.8/thickness 2.0 mm TEMPERATURE (C°) BAM 6000 0,0 50,0 100,0

http://www.dynoteq.com/en/files/en/donit-tesnit/bam-6000.pdf

Date added: August 18, 2016 - Views: 1

pdf
Technical Data Sheet - ERIKS Gasket Technology

acc. DIN 28091-1 Standard Unity Value * Physical DIN 28 091-2 FA - A 1 - O properties (Gasket thickn. DIN 28 090-2 [g/cm³] 1,70 2.00mm) DIN 52 910 [N/mm²] 18

http://www.eriksgaskets.co.uk/dss/docs/464_Novatec-PremiumII.pdf

Date added: August 25, 2016 - Views: 1

pdf
Technisches Datenblatt / Technical datasheet:...

DIN 28091-2 % 6 - 9 DIN 28091-2 % ≈ 1.5 DIN 28091-2 % ≈ 0.030 DIN 28091-2 mg/ (s · m) < 0.2 DIN 28091-2 % > 50 Norm / Standard Einheit / Unit Wert / Value - °C 400

https://shop.maagtechnic.ch/maag/Datasheets/Dichtungsplatte-REINZ-AFM-34-IGV_ger_eng.pdf

Date added: August 18, 2016 - Views: 1

pdf
Product range: BAX 5000 - William Johnston

‘ Correspond to DIN 28091-2 BAX 5000 030407 In order to spread the most comprehensive knowlege of our products, our highly skilled group of experts organized in

https://williamjohnston.co.uk/data-sheets/aramid-sheet/DONIT%20BAX5000%20WJ14.pdf

Date added: August 18, 2016 - Views: 1

pdf
BA-R - Dynoteq

BA-R, 2 mm TEMPERATURE [°C] PRESSURE [bar] EN 1514-1, Type IBC, PN 40/DIN 28091-2, 3.8. In order to spread the most comprehensive knowledge of our products, ...

http://www.dynoteq.com/en/files/en/donit-tesnit/ba-r.pdf

Date added: August 25, 2016 - Views: 1

pdf
Technisches Datenblatt / Technical datasheet:...

DIN 28091-2 % 7 - 12 DIN 28091-2 % 4 - 8 DIN 28091-2 % 13 - 15 DIN 28091-2 % ≈ 0.65 DIN 28091-2 mm ≈ 0.012 DIN 28091-2 mg/ (s · m) < 0.1 DIN 28091-2 % > 50

https://shop.maagtechnic.ch/maag/Datasheets/Dichtungsplatte-Reinz-AFM-37_ger_eng.pdf

Date added: August 25, 2016 - Views: 1

pdf
NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED...

DIN 28090-3; Static gaskets for flange connections - Gaskets made from sheets - Part 3: Chemical resistance test procedures 94 DIN 28091-1 Technical delivery ...

http://www.bds-bg.org/images/upload/Notifications/Notifications_98_34_2013_en/Notifications_1025_04_13_en.pdf

Date added: August 19, 2016 - Views: 1

pdf
Materialkurzübersicht 39-00158-01 e - HDRT

< 0.1 (DIN 28091-4)-----Application temp., max. temporary/continuos °C 550/450 950/950 Operating pressure maximum bar 100 (at 450 °C) - Form supplied Rolls and seals

http://www.hdrt.nl/modules/download_gallery/dlc.php?file=9&id=1421929506&sid=68

Date added: August 25, 2016 - Views: 1

pdf
C4430 Gasket Material TDS - AG - Associated...

Hot Compression DIN 28091-2 7% Hot Recovery DIN 28091-2 1% Spring Back R DIN 28091-2 0.019mm ... C4430 Gasket Material TDS Author: Associated Gaskets Subject:

http://agaus.com.au/wp-content/uploads/2013/11/C4430-Gasket-Material-TDS.pdf

Date added: August 19, 2016 - Views: 1

pdf
novatec SPECIAL engineered graphite with Kevlar

acc. DIN 28091-1 Standard Unity Value * Physical DIN 28 091-2 FA - A 1 - O properties (Gasket thickn. DIN 28 090-2 [g/cm³] 1.00 ± 0.05 2.0 mm) DIN 52 910

http://www.frenzelit.com/file/262_TDBSPECIAL_e_20mm.pdf

Date added: August 25, 2016 - Views: 1

pdf
Technical Data Sheet - frenzelitsealingsystems.com

acc. DIN 28091-1 Technical Data Sheet FRENZELIT-WERKE GmbH Co. KG · Postfach/P.O.Box 11 40 · 95456 Bad Berneck/Germany Phone: +49 9273 72-0 · Fax: ...

http://www.frenzelitsealingsystems.com/file/2878_TDB%20novaflon100%20-englisch-%202,0%20mm.pdf

Date added: August 25, 2016 - Views: 1

pdf
Merkel PTFE gaskets for high level applications

Characteristic values of seal as per DIN 28091, Part 3 Characteristic values Value Density 1.2 g/cm3 ... Merkel PTFE gaskets for high level applications Simrit ...

http://www.koryosmt.co.kr/Front/service/download/2_simrit/2_Product%20Brochures/Merkel%20PTFE%20Flat%20Seals.pdf

Date added: August 18, 2016 - Views: 1