Astm D 751 docs

Searching:
doc
ITEM D-751 MANHOLES, CATCH BASINS, INLETS AND...

ITEM D-751 MANHOLES, CATCH BASINS, INLETS AND INSPECTION HOLES. DESCRIPTION. 751. ... The sand shall conform to the requirements of ASTM C 144. 751-2.3 CONCRETE.

http://www.portofportland.com/Library/Eng_Specs_Gdlines/D-751.docx

Date added: August 20, 2016 - Views: 1

doc
AC 150/5370-10C, STANDARDS FOR SPECIFYING...

Steel castings shall meet the requirements of ASTM A 27. d. ... structural steel units shall be galvanized to meet the requirements of ASTM A 123. 751-2.7 STEPS.

http://faaco.faa.gov/attachments/Division_3_Specs-d751-Manholes_etc.doc

Date added: August 20, 2016 - Views: 1

doc
SUGGESTED MASTER SPECIFICATION - PNA

D 751 Test Method for Coated Fabrics. 3. ... 37 psi in accord with ASTM D 3786. d. Handling: 1) ... SUGGESTED MASTER SPECIFICATION ...

http://www.pna-inc.com/products/hydra_cure/PNA%20HydraCure%20Wet%20Curing%20Covers%20MSpec.doc

Date added: August 18, 2016 - Views: 1

doc
CABLEGUARD™ ELASTOMERIC WRAP - The D.S. Brown...

The material covered by this specification shall be an elastomeric cable wrap that meets the ... (ASTM D-751) 120% minimum Tear Propagation (ASTM D-751 tongue ...

http://www.dsbrown.com/Resources/Bridges/cableguard/CableguardSpecWeb.doc

Date added: August 21, 2016 - Views: 1

doc
072500 - Weather Barriers - Global Headquarters

ASTM International. ASTM D 751; Standard Test Methods for Coated Fabrics. ASTM D 4533; Standard Test Method for Trapezoid Tearing Strength of Geotextiles.

http://www.dupont.com/content/dam/assets/products-and-services/construction-materials/assets/SPEC-97%20-%20DuPont%20RoofLiner%20Product%20Specifications.doc

Date added: August 21, 2016 - Views: 1

doc
SECTION 07535 - New York

Tear Strength: 90 lb min, ASTM D 751 (tongue tear). 5. ... END OF SECTION. D&C JWM:dja. Updated 02/08/2008. Printed 04/16/2015 075002 - 1 Project No. Title:

https://online.ogs.ny.gov/dnc/masterspec04/docs/Division07ThermalAndMoistureProtection/075002MechanicallyAttachedHypalonRoofingSystem.doc

Date added: August 21, 2016 - Views: 1

doc
part 2b specs - FAACO

Puncture Strength (ASTM D 751) Min. 50 lbs. 4. Mullen Burst Strength (ASTM D 751) Min. 100 psi. Packaging and Identification Requirements ... part 2b specs ...

http://faaco.faa.gov/attachments/0700346_specs_24.doc

Date added: August 21, 2016 - Views: 1

doc
SECTION 07533 - gsp.extra.chrysler.com

Manufacturer to guarantee the membrane thickness meets or exceeds the specified thickness when tested according to ASTM D-751.

https://gsp.extra.chrysler.com/mfg/amedd/aamebldg/2014Specs/075419%20POLYVINYL-CHLORIDE%20(PVC)%20ROOFING.doc

Date added: August 20, 2016 - Views: 1

doc
DETAILED SPECIFICATIONS FOR

The material supplied under these specifications shall be a first quality product designed and manufactured specifically for this ... ASTM D-751. Method A Procedure 1 ...

http://www.etpinfo.com/UPDATES/FLOATING%20BAFFLE%20SPECIFICATIONS.doc

Date added: August 21, 2016 - Views: 1

doc
SECTION - Engineered Textile Products, Inc.

Breaking Strength, lbf ASTM D 751 250 (grab tensile at strain rate Grab Method A. of 12 in./min.) Elongation at break of fabric, % ASTM D 751 25 typical.

http://www.etpinfo.com/channelmaster/Specifications-Steel-Tanks-PPE.doc

Date added: August 21, 2016 - Views: 1

doc
NATURAL RESOURCES CONSERVATION SERVICE - USDA

Natural resources conservation service conservation practice ... Polyvinyl chloride plastic sheeting shall meet the requirements indicated in ASTM-D-3083, ...

https://efotg.sc.egov.usda.gov/references/public/CO/CO428B_spec.doc

Date added: August 21, 2016 - Views: 1

doc
Part 9 of AC 150/5370-10G Standards for Specifying...

Item D-751 Manholes, ... ASTM A760Standard Specification for Corrugated Steel Pipe, ... Part 9 of AC 150/5370-10G Standards for Specifying Construction Of Airports, ...

http://www.faa.gov/airports/engineering/construction_standards/media/AC-150-5370-10G-part-9.docx

Date added: August 20, 2016 - Views: 1

doc
Revised: July 10, 1998 - Yemm & Hart Home Page

ASTM D 751 Standard Test Method for Elongation. 4. ASTM D 751 Standard Test Method for Tear Strength. 5. ASTM D 2047 Standard Test Method for Coefficient of Friction. 6.

http://www.yemmhart.com/materials/flexisurf/pdf_flexisurf/flexisurfspecifications.docx

Date added: August 21, 2016 - Views: 1

doc
SECTION 07525 - gaf.com

American Society for Testing and Materials (ASTM) - Annual Book of ASTM Standards. ASTM D-751 – Standard Test Methods for Coated Fabrics . ASTM D-2137 ...

http://www.gaf.com/Commercial_Roofing_Systems/EverGuard_TPO/EverGuard_Extreme_TPO_80_Membrane/T_FA_N_N_80EX_80FBEX.doc

Date added: August 21, 2016 - Views: 1

doc
Irrigation Water Conveyance (ft) - USDA

Irrigation Water Conveyance. Ditch and Canal Lining, Flexible Membrane (Ft.) Code 428B definition. A fixed lining of impervious material installed in an existing or ...

https://efotg.sc.egov.usda.gov/references/Agency/ID/428B-CanalLiningMembrane-Feb03.doc

Date added: August 21, 2016 - Views: 1

doc
SECTION - Engineered Textile Products, Inc.

Before executing any of the work in this section, ... 6.5 oz/yd2 220 g/m2 Thickness ASTM D 751 30.0 mils min 0.75 mm min Weight ASTM D 751 30.0 ± 2 oz/yd2 1020 ...

http://www.etpinfo.com/channelmaster/Specifications-Steel-Tanks-XR3PW.doc

Date added: August 21, 2016 - Views: 1

doc
Division 7 - Custom Seal

Tearing Strength, ASTM D-751 245N (55lbf.), Min. Min. Properties After. Heat Aging ASTM D-751 a. Breaking Strength Per 90% . b. Tear Strength ASTM D-3045 90%.

http://www.customseal.com/PDF/CUSTOMspecTPO.doc

Date added: August 21, 2016 - Views: 1

doc
Metric-SI] - General Services Administration

[Metric-SI] 3FNE-CO 96-571B. April 21, 2008. purchase description for. CHAIRS, ROTARY AND STRAIGHT, WOOD OFFICE, ... Test Method Breaking Strength ASTM D 751 ...

http://www.gsa.gov/portal/getMediaData?mediaId=215811

Date added: August 20, 2016 - Views: 1

doc
www.etpinfo.com

Bonded Seam Strength ASTM D 751 Grab test Method, Procedure A. 550 lb min. 2450 N min. Abrasion Resistance ASTM D 3389, H-18 Wheel, 1000 g Load.

http://www.etpinfo.com/floating-baffle-curtain/8130_XR-5_Physical_Property_Chart.doc

Date added: August 21, 2016 - Views: 1

doc
www.buildsite.com

ASTM D 751 Test Method for Coated Fabrics. ASTM D 570 Test Method for Water Absorption of Plastics . UL 790 Tests for Fire Resistance of Roof Covering Materials.

http://www.buildsite.com/pdf/carlislecoatings/CCW-MiraDRI-860861-Guide-Specifications-B23706.doc

Date added: August 21, 2016 - Views: 1

doc
DIVISION 100 - Department of Transportation

... ASTM D 751 48.8 to 49.6 mils (d) Density, ASTM D 792 0.549 to 0.555 ounces per cubic inch (e) ... ASTM D 522, using the 1/4-inch No cracking or flaking.

https://flh.fhwa.dot.gov/resources/specs/fp-03/fp-03usc-div700.doc

Date added: August 20, 2016 - Views: 1

doc
DIVISION 100 - Department of Transportation

... ASTM D 751 1.24 to 1.26 mm (d) Density, ASTM D 792 0.941 to 0.960 g/cm3 (e) ... 6.35 6.35 6.35 ASTM D 6525 Minimum permissible shear stress(4) (pascals) ...

https://flh.fhwa.dot.gov/resources/specs/fp-03/fp-03met-div700.doc

Date added: August 19, 2016 - Views: 1

doc
Metric-SI] - General Services Administration

Perform test on a sample panel finished in the same way as production pieces according to ASTM D 2199, ... Test Method Breaking Strength ASTM D 751 ...

http://www.gsa.gov/portal/getMediaData?mediaId=215815

Date added: August 20, 2016 - Views: 1

doc
CSI Division 7 Specification - Sweets

CSI Division 7 Guide Specifications TIEMPO™+ 2000 TPO MEMBRANE MECHANICALLY ... Breaking Strength ASTM D-751 MD 339.94 lbf. (1.5 kN), 335.73 lbf. (1.4 kN ...

http://sweets.construction.com/swts_content_files/2414/389315.doc

Date added: August 21, 2016 - Views: 1

doc
systemcomponents.net

ASTM D 751: Standard Test Methods for Coated Fabrics. ASTM D 5261: Standard Test Method for Measuring Mass per Unit Area of Geotextiles. ASTM D 1117: Standard Guide ...

http://systemcomponents.net/techlibrary/coverpro_guide_specification.doc

Date added: August 21, 2016 - Views: 1

doc
www.systemcomponents.net

ASTM D 751: Standard Test Methods for Coated Fabrics. ASTM D 5261: Standard Test Method for Measuring Mass per Unit Area of Geotextiles. ASTM D 1117: Standard Guide ...

http://www.systemcomponents.net/techlibrary/coverpro_3000_guide_specification.doc

Date added: August 21, 2016 - Views: 1

doc
Division 7 - Custom Seal

Tear Strength, (lbs) ASTM D 751 200 x 45 lbs 400 x 90 lbs. Tensile Strength (psi) ASTM D-751 35 x 200 psi 50.8 x 290 psi. Breaking Strength (%) ASTM D-3045 ...

http://www.customseal.com/PDF/CUSTOMspecPVC.doc

Date added: August 21, 2016 - Views: 1

doc
Construction Specification 51—Corrugated Metal...

Construction Specification 751—Corrugated Metal Pipe. 1. Scope. ... Zinc dust - zinc oxide primer, ASTM D 79 and D 520. b. Zinc dust paint, ASTM D 4146.

https://efotg.nrcs.usda.gov/references/public/al/751.doc

Date added: August 21, 2016 - Views: 1

doc
www.blanket-insulation.com

ASTM D 751-95 Standard Test Methods for Coated Fabrics. Vinyl Coated Polyester Composite with Continuous Service Temperatures of 250˚F (121˚C) ...

http://www.blanket-insulation.com/PDF2014/MSWord2011/LT250A-VP-WTF.doc

Date added: August 21, 2016 - Views: 1

doc
SPECIFIER NOTE: THE FOLLOWING SPECIFICATION MAY BE...

The following specification outlines the requirements for a ... 70 mils - Tensile strength @ break 120 lb/in ASTM D-751 Elongation 50% ASTM D-751 Tearing ...

http://www.derbigumenergies.us/toolbox/ContentDir/Certifications_US_file_19.doc

Date added: August 18, 2016 - Views: 1

doc
MASTERSPEC - ePro Serv

... ASTM G 23 No Effect Moisture Vapor Transmission ASTM E 96 .071 g/sq. ft. /hr. Hydrostatic Water Pressure ASTM D 751 28 psi Perm rating (US Perms) ASTM E 96 ...

http://www.eproserv.com/download.php?key=2be9ac233c7f3b0a09d53076a228b436b

Date added: August 21, 2016 - Views: 1

doc
MASTERSPEC - ePro Serv

... Aging ASTM G 23 No Effect Moisture Vapor Transmission ASTM E 96 0.088 g/sq. ft. /hr. Hydrostatic Water Pressure ASTM D 751 26 psi Perm Rating (US PERMS) ASTM ...

http://www.eproserv.com/download.php?key=20ebefd49b34715f8f639e0523a1b24a3

Date added: August 21, 2016 - Views: 1

doc
Spec Data Sheet – AVM System 700 Rev

... ASTM D-751 (1989) PASS PASS PASS PASS Breaking Strength - ASTM D-752 ... Spec Data Sheet – AVM System 700 Rev. 10/2008 AVM Document # 30700. Title:

http://www.avmindustries.com/wp-content/uploads/specs/doc/0700-Spec-Sheet-AVM-System-700-Tile%20Waterproofing.doc

Date added: August 21, 2016 - Views: 1

doc
Multi-Flow drainage system by Varicore...

Pond Liner Venting and Drainage System. MODEL SPECIFICATION . 1.0 DESCRIPTION . ... lb ASTM D-751 50 Mullen Burst, psi ASTM D-3786 200 Trapezoidal Tear, ...

http://easypropondproducts.com/media/pdfs/MultiVentSpecification2010.doc

Date added: August 21, 2016 - Views: 1

doc
randallmfg.com

ASTM D 751-89 sec. 10.2. 13. 18. Tongue Tear, lbs. Warp. Fill. FS 5134 / ASTM D2261. 90. 100. 95. 110. Strip Tensile, lbs. Warp. Fill. FS 5102 / ASTM D5035. 240. 185 ...

http://randallmfg.com/warehouse/wp-content/uploads/2012/10/Industrial-Curtains-Spec-Sheet.docx

Date added: August 21, 2016 - Views: 1

doc
MASTERSPEC - ePro Serv

ASTM E 96. ASTM D 751. 26 psi. ASTM D 1434. ASTM C 836 & ASTM C 704. ASTM C 836. No Cracking. ASTM C 836-00. TYPICAL UNCURED PROPERTIES. Specific Gravity. Viscosity ...

http://www.eproserv.com/upfiles/031915013054_Concrete_Deck_Green_Roof_(Reinforced)_with_Bentonite.doc

Date added: August 21, 2016 - Views: 1

doc
www.arcat.com

ASTM D 751 - Standard Test Methods for Coated Fabrics. ASTM D 828 - Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of ...

http://www.arcat.com/sdspecs/docx04/07_54_19dlr.docx

Date added: August 21, 2016 - Views: 1

doc
SECTION 329500 - VEGETATED ROOF ASSEMBLIES

ASTM D 751 Standard Test Method for Coated Fabrics. ASTM D 7004 Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes. PREINSTALLATION MEETINGS.

http://www.tremcosealants.com/fileshare/specs/07%2013%2026%2001%20SELF-ADHERING%20SHEET%20WATERPROOFING.doc

Date added: August 21, 2016 - Views: 1

doc
2007 Specifications - Kentucky Department of...

ASTM D 751-79 SEAM STRENGTH 70 LBS. Seat cushions shall be constructed not to depress more than eighty ... TYPES A, C AND D BUSES PERFORMANCE SPECIFICATIONS.

http://education.ky.gov/districts/trans/Documents/2007%20Specifications.doc

Date added: August 18, 2016 - Views: 1

doc
neh642cont - NRCS

peel strength, lb/in*** ASTM D 751 ASTM D 413 35. 14 *All values, unless specified otherwise, are minimum average roll values as reported for the test method.

http://www.nrcs.usda.gov/Internet/FSE_DOCUMENTS/nrcs141p2_036681.doc

Date added: August 18, 2016 - Views: 1

doc
Tufdek spec 07185 tuf 2012-01-01

ASTM D 4434 - 09 Standard Specifications for (Polyvinyl Chloride) ... Elongation Tear Strength - ASTM D 751: PASS. Dimensional Change - CGSB 37.54-95: PASS.

http://tufdek.com/wp-content/uploads/TUFDEK-Full-Product-Guide-Specification-Jan-01-2016-Hidden-Text2.doc

Date added: August 21, 2016 - Views: 1

doc
SECTION 03130 - Quad-Lock Insulating Concrete...

ASTM D 751-00 – Standard Test Methods for Coated Fabrics. CAN/CGSB-51.34-M86 – Vapour Barrier, Polyethylene Sheet for Use in Building Construction.

http://www.fab-form.com/fastfoot/fastfootFiles/FastfootCsiSpecification.doc

Date added: August 21, 2016 - Views: 1

doc
SECTION 07552 - SBS-MODIFIED BITUMINOUS MEMBRANE...

ASTM D 751 – Grab Method 200 (35) 305 Elongation at Break (Cross Direction) % ASTM D 751 – Grab Method 15 29.5 Seam Strength, min.

http://facilities.mysdhc.org/PandC/standards/07_54_16%20HCPS%20Roofing%20System%205.doc

Date added: August 18, 2016 - Views: 1

doc
MASTERSPEC - ePro Serv

... Vapor Transmission ASTM E 96 .01 g/sq. ft. /hr. Perm rating ASTM E 96 0.02 Hydrostatic Water Pressure ASTM D 751 26 psi Air Leakage ASTM E 2178 0.009 L ...

http://www.eproserv.com/upfiles/042115082114_Air_Barrier.doc

Date added: August 21, 2016 - Views: 1

doc
80SIT-M/A-MM-N-20(ST8RA) - JM.com

60WCT-M/A-MM-N-20. 60WCT: JM Spec Variant: 60 = 60 mils. W = Wood. C = Coverboard. T ... Refer to ASTM D 1079 “Terminology Relating to Roofing and Waterproofing”; ...

http://specjm.com/files/docs/60wct-m_a-mm-n-20(st6ra).doc

Date added: August 21, 2016 - Views: 1

doc
www.arcat.com

ASTM D 751 - Standard Test Methods for Coated Fabrics; 2000. ASTM D 1434 - Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and ...

http://www.arcat.com/sdspecs/docx04/07_14_00epr.docx

Date added: August 21, 2016 - Views: 1

doc
45SIT-M/M-MM-N-20(ST4RM) - JM.com

ASTM D 573/751, Properties After Heat Aging: Pass. Breaking Strength: 330 lbf ... 45SIT-M/M-MM-N-20(ST4RM) Subject: JM MasterSpec v. 01 Author: Brian Shamas

http://www.specjm.com/files/docs/60WST-M_M-MM-N-20(ST6RM).doc

Date added: August 21, 2016 - Views: 1

doc
Geomembrane Pond Liner - Layfield Group

ASTM D751 – Standard Test Methods for Coated Fabrics. ASTM D2136 ... Hydrostatic Resistance ASTM D 751: < [1400][1700] kPa> << [200] [240] psi>>.

https://www.layfieldgroup.com/content_files/files/FullSpecs/3347161304_BioGasCover.doc

Date added: August 21, 2016 - Views: 1

doc
www.arcat.com

Breaking Strength (ASTM D 751): 200 lbf/in (35 kN/m) minimum. Tearing Strength (ASTM D 751): 45 lbf/in (200 N/m) minimum. Elongation (ASTM D 751): 15 percent.

http://www.arcat.com/sdspecs/docx/07540car.docx

Date added: August 21, 2016 - Views: 1